h3c交换机配置nat_H3C-NAT命令配置
h3c交换机配置nat_H3C-NAT命令配置配置地址池 ：
<H3C>system-view
[H3C]nat address-group group-number start-add end-add
配置⼀对⼀静态地址转换
1.
<H3C>system-view
[H3C]nat static local-ip(本地IP) global-ip(通⽤IP)
[H3C]interface (端⼝号)
[H3C-inter]nat outbound static (把这个端⼝设置为出站)
军校有哪些2.
<H3C>system-view
呼和浩特旅游
[H3C]interface nat interface-number
[H3C-NAT]nat static local-ip golbal-ip
[H3C-NAT]quit
[H3C]interface (端⼝号)
[H3C-INT]nat outbound static (把这个端⼝设置为出站)
cisco:
ip nat inside source static local-ip global-ip
int (端⼝号)
ip nat inside
int (端⼝号)
ip nat outside
配置⽹段对静态地址的转换
1.
<H3C>system-view端口设置
[H3C]interface nat interface-number
[H3C-NAT]nat static net-to-net local-network global-network
[H3C-NAT]quit
[H3C]interface (接⼝地址号)
[H3C-int]nat outbound static (把这个端⼝设置为出站)
2.
危机管理<H3C>system-view
[H3C]nat static net-to-net local-start-address local-end-address global global-network
[H3C]interface (端⼝号)
[H3C-INT]nat outbound static (把这个端⼝设置为出站)
配置动态NAT
1.EASY IP
<H3C>system-view
[H3C]interface (端⼝号)
[H3C-INT]nat outbound acl-number [next-hop ip-address(可选，按设备定)] 2.NOPAT
<H3C>system-view划痕修复
[H3C]interface (端⼝号)
[H3C-INT]nat outbound acl-number address-group group-number nopat 或者在⼊接⼝配置
[H3C-INT]nat inbound acl-number address-group group-number nopat 3.NAPT
<H3C>system-view父亲节祝福短信
[H3C]interface (端⼝号)
[H3C-INT]nat outbound acl-number address-group group-number
或者在⼊接⼝配置
[H3C-INT]nat inbound acl-number address-group group-number

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。