陶瓷生产流程英文版外贸陶瓷必看
陶瓷生产流程英文版外贸陶瓷必看陶瓷生产流程英文版外贸陶瓷必看～～
以下以贴花和手绘，分别介绍釉上彩和釉下彩的工艺流程:
第一种;Decaled Dinnerware
1. Milling 练泥
Various raw materials including feldspar, silica, clay and pottery stone are mixed and fine-milled in the ball mill.
陶瓷制作工艺流程
2. Filter press & Vacuum extrusion 摞泥
The clay body is made by filter-pressing the slip. The pressed body de-aired and extruded to the required size through the pug mill.
3. Green Making 制坯
Using appropriated roller head and plaster mould, green body is formed. For the irregular shapes such as teapots and figurines, slip casting is used. In casting, liquid clay (slip) is poured into plaster moulds and the green shape forms on the mould as the water is absorbed through the plaster mould.
4. Finishing 修坯
The rough edges and foot of the green ware are cleaned with wet sponge by automatic edge-cleaning machine or by skilled hand
5. Glazing 上釉
To seal the surface of the biscuit body and to give the product its glossy finish, glaze is applied using automatic glaze spraying line.
6. Glost firing 烧釉
Carefully loading the glazed ware onto a kiln car, the glazed ware is fired at 1280? C. At the temperature, the
glaze powder melts and turns into a transparent glass layer covering the biscuit body. The glost-fired ware is inspected and ready for the decoration.
7. Lithography 贴花
The printed decal is transferred onto the glost ware and dried.
8. Decoration firing 二次烧结
The decal and the ware are fired at appropriated temperatures and the printed patterns permanently fuse onto the glaze layer to give permanent durable decoration.
9. Inspeciton & Packaging 修整成箱
Experienced eyes in the inspection area checks for possible faults in the ware and the finished ware is packaged as necessary

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。