RTL8723AS蓝牙wifi二合一SDIO接口模块规格书(RL-SM02BD-8723AS)
SDIO PRODUCT SPECIFICATION IEEE 802.11 b/g/n 2.4GHz 1T1R WiFi with Bluetooth v2.1+EDR/Bluetooth 3.0/3.0+HS/4.0
RF-SM02BD (Realtek RTL8723AS)
Combo Module
Version 1.1
C ONTENT
PRODUCT DESCRIPTION (3)
PRODUCT FEATURES (3)
PRODUCT SPECIFICATIONS (4)
MAIN CHIPSET ........................................................................................ ........... ............................. . (4)
................ ............................... . (4)
MECHANICAL .............................................................................................................. ........... ......................... . (7)
..... .......... ...... (8)
MODULE . ...... .. (10)
ID ......... .. (11)
< ..... .. .. (11)
O PERATING ..................................................................................................................... ... .... .................. (11)
.... ............... .... . (11)
Circuit ...... .... ............... .... (11)
Module PIN feet ...... .... .............. . .... (11)
WIFI\BT RF Circuit ...... .... ............... .... (11)
SDIO interface Circuit ...... .... ............... .... (12)
BT interface Circuit ...... .... ............... .... (12)
Recommended ................ ...... .... ............... .... (13)
..................... ................. .. (14)
PRODUCT DESCRIPTION
RF-SM02 is a small size and low profile of WiFi+BT combo module with
LGA (Land-Grid Array) footprint, board size is 20mm*10mm with module height 2mm. It can be easily manufactured on SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer product. It provides
GSPI/SDIO interface for WiFi to connect with host processor and high speed UART interface for BT. It also has a PCM interface for audio data transmission with direct link to external audio codec via BT controller. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11n b/g/n MIMO technology and Bluetooth can support BT2.1+EDR/BT3.0 and BT4.0.
RF-SM02 uses Realtek RTL8723AS, a highly integrated WiFi/BT single
chip based on advanced COMS process. RTL8723AS almost integrates whole WiFi/BT function blocks into a chip, such as SDIO/UART, MAC, BB, AFE, RFE, PA, EEPROM and LDO/SWR, except fewer passive components remained on PCB.
PRODUCT FEATURES
○Operate at ISM frequency bands (2.4GHz)
○GSPI/SDIO for WiFi and UART for Bluetooth
○IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i
○Fully Qualified Bluetooth 2.1 + EDR specification including both 2Mbps
and 3Mbps modulation mode
○Fully qualified Bluetooth 3.0
○Fully qualified Bluetooth 4.0 Dual mode
○Full –speed Bluetooth operation with Piconet and Scatternet support.
○Enterprise level security which can apply WPA/WPA2 certification for WiFi.○WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates
○Support sophisticated WiFi/BT coexistence mechanism to enhance collocation performance
○Support antenna diversity for WiFi and BT antenna selection
2022年庆祝国庆73周年
○Support Bluetooth adaptive power management mechanism
○Full-featured software utility for easy configuration and management
○RoHS compliance
○Low Halogen compliance
PRODUCT SPECIFICATIONS
Main chipset
WiFi/BT Single Chip: Realtek RTL8723AS-CG
Functional Specifications
WiFi:
夜颂Standards IEEE 802.11b, IEEE 802.11g, Draft IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i
BT:
V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
Bus Interface WiFi: GSPI/SDIO    BT: UART
Form Factor L*W*H = 20mm*10mm*2mm
802.11b:
11, 5.5, 2, 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
Data Rate MCS 0 to 7 for HT20MHz
MCS 0 to 7 for HT40MHz
BT:
1 Mbps for Basic Rate 2,3 Mbps for Enhanced Data Rate
WiFi:
Media Access Control CSMA/CA with ACK BT:
AFH, Time Division
802.11b:
CCK, DQPSK, DBPSK
Modulation Techniques
802.11g: 64 QAM, 16 QAM, QPSK, BPSK 802.11n:
64 QAM, 16 QAM, QPSK, BPSK
BT:
8DPSK, π/4 DQPSK, GFSK
Network Architecture WiFi:
Ad-hoc mode (Peer-to-Peer ) Infrastructure mode
BT:
Pico Net
Scatter Net
WiFi 2.4GHz:
教师节的来历和意义11: (Ch. 1-11) – United States
跳绳的正确方法与技巧
Operating Channel 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan
BT 2.4GHz:
Ch. 0 ~78
雨爱 歌词
Frequency Range    2.400GHz ~ 2.4835 GHz
802.11b@11Mbps 16dBm 802.11g@6Mbps
16dBm
802.11n 16dBm (MCS
0_HT20)
802.11g@54Mbps
14dBm
good time中文歌词13dBm (MCS 7_HT20)
13dBm (MCS 0_HT40)
13dBm (MCS 7_HT40)
Transmit Output Power – 1x1 (Tolerance: ±1.5dBm)
BT:
Max +10dBm
802.11b@11Mbps -84dBm 802.11g@54Mbps
-73dBm
802.11n -69dBm (MCS
7_HT20)
-66dBm (MCS 7_HT40)
Receiver Sensitivity
BT:
-89dBm@1Mbps, -90dBm@2Mbps, -83dBm@3Mbps
WiFi :
WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE Security
802.11x, IEEE 802.11i BT:
Simple Paring
Operating Voltage    3.3 V ±9% I/O supply voltage
OS supported Windows XP/Win7/Linux/Android
Power Consumption (3.3V)
(Typical)WiFi :
TX Mode: (Conituous mode) 260mA (MCS7/BW40/13dBm) RX Mode: (Conituous mode) 190mA (MCS7/BW40/-60dBm) Associated Idle: 4mA Unassociated Idle: 2.9mA
RF disable Mode: 3mA
BT :
Inquiry & Page Scan: 1.7mA ACL no traffic: 15mA
SCO HV3: 20mA
Parked 1.28s beacon: 1.12mA Reset: 0.05mA

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。