HQ136 HQ132
HQ130
Introduction
Congratulations on your purchase and welcome to Philips! T o fully benefit from the support that Philips offers,register your product at www.philips/ welcome.
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Warning
-This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities,or lack
of experience and knowledge,unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
Caution
-Keep the appliance dry (Fig.1).
-Use and store the appliance at a temperature between 15°C and 35°C.
-Remove the batteries from the appliance if you are not going to use it for a month or more.
Compliance with standards
This Philips appliance complies with all standards regarding electromagnetic fields (EMF).If handled properly and according to the instructions in this user manual,the appliance is safe to use based on scientific evidence available today.
Preparing for use
Inserting batteries
The appliance runs on two R6 AA 1.5-volt batteries.Preferably use Philips alkaline batteries. Make sure that your hands are dry when you insert the batteries.
1 Remove the lid of the battery
compartment (Fig. 2)
2 Place two batteries in the battery
compartment (Fig. 3).
Note:Make sure the + and - indications on the batteries match the indications in the battery compartment.
Note:The shaver does not work if the batteries have been placed incorrectly.
3 Put the lid of the battery compartment back
onto the appliance. First insert the top part of the lid (1) and then press down the bottom
part (2) until you hear a click (Fig. 4).
How to avoid damage due to battery
leakage
-Do not expose the appliance to temperatures higher than 35°C.
-Remove the batteries if you are not going to use the appliance for a month or more.
-Do not leave empty batteries in the appliance.
Shaving time
T wo new batteries offer a shaving time of 60
minutes.
Using the appliance
Shaving
Y our skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
Shaving on a dry face gives the best results.
1 Push the on/off slide upwards to switch on
the shaver (Fig. 5).
2 Move the shaving heads over your skin. Make
both straight and circular movements (Fig. 6).
3 Push the on/off slide downwards to switch off
the shaver.
4 Put the protection cap on the shaver after
use to prevent damage to the shaving
heads (Fig. 7).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
Regular cleaning guarantees better shaving
performance.
For easy and optimal cleaning,Philips Shaving Head
Cleaning Spray (type no.HQ110) is available.Ask
your Philips dealer for information.
Note:Philips Shaving Head Cleaning Spray may not
be available in all countries.Contact the Consumer
Care Centre in your country about the availability in
your country.
Y ou can also clean the shaver in the following way:
Every week: shaving unit and hair
chamber
1 Switch off the shaver.
2 Clean the top of the appliance with
the cleaning brush (Fig. 8).
3 Press the release button (1) and remove the
shaving unit (2) (Fig. 9).
4 Clean the inside of the hair chamber with the
cleaning brush (Fig. 10).
5 Clean the inside of the shaving unit with the
cleaning brush (Fig. 11).
6 Put the shaving unit back onto the shaver.
Every two months: shaving heads
笔记本电脑怎么保养1 Switch off the shaver.
2 Press the release button (1) and remove the
shaving unit (2) (Fig. 9).
3 T o remove the retaining frame, push the sides
of the central spring towards each other
(1). Then lift the retaining frame out of the
shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the retaining
frame (Fig. 13).
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance.If you accidentally mix up the sets,it
could take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the short-bristled side
of the cleaning brush (Fig. 14).
Brush carefully in the direction of the arrow.
6 Clean the guard with the cleaning
brush (Fig. 15).
7 Slide the shaving heads back into the retaining
frame and put the retaining frame back into
the shaving unit (Fig. 16).
8 Put the shaving unit back onto the shaver.
Extra thorough cleaning
For extra thorough cleaning,put the shaving
heads in a degreasing liquid (e.g.alcohol) every six
months.T o remove the shaving heads,follow steps
1 to 4 described above.After cleaning,lubricate
the central point on the inside of the guards with a
drop of sewing machine oil to prevent wear of the
shaving heads.
Replacement
Replace the shaving heads every 2 years or if they
are damaged or worn.Replace them with HQ4 Ç
Philips shaving heads only.
1 Switch off the shaver.
2 Press the release button (1) and remove the
shaving unit (2) (Fig. 9).
3 T o remove the retaining frame, push the sides
of the central spring towards each other
(1). Then lift the retaining frame out of the
shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the retaining
frame and replace them with new
ones (Fig. 13).
5 Put the retaining frame back into the shaving
unit.
6 Put the shaving unit back onto the shaver.
Accessories
The following accessories are available:
-HQ4 Ç Philips shaving heads.
-
HQ110 Philips Shaving Head Cleaning Spray
(not available in China).
Environment
-Batteries contain substances that may pollute
the environment.Do not throw away empty
batteries with the normal household waste,
but dispose of them at an official collection
point for batteries.Always remove the batteries
before you discard and hand in the appliance at
an official collection point.
-Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling.By doing this,you help to preserve
the environment (Fig.17).
Guarantee & service
If you need service or information or if you have
a problem,please visit the Philips website at www.
philips or contact the Philips Consumer Care
Centre in your country (you find its phone number
in the worldwide guarantee leaflet).If there is no Consumer Care Centre in your country,go to your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are
not covered by the terms of the international guarantee because they are subject to wear.
T roubleshooting
This chapter summarises the most common problems you could encounter with the appliance.If you are unable to solve the problem with the information below,contact the Consumer Care Centre in your country.
产品简介
感谢您的惠顾，欢迎光临飞利浦！为了您能充分享受飞利浦提供的支持服务，请登陆 www. philips/welcome 网站注册您的产品。
注意事项
使用产品之前，请仔细阅读本用户手册，并妥善保管以供日后参考。
警告
-本产品不打算由肢体不健全、感觉或精神上有障碍或缺乏相关经验和知识的人（包括儿童）使
用，除非有负责他们安全的人对他们使用本产品进行监督或指
导。
-应照看好儿童，确保他们不玩耍该产品。
注意
-保持产品干燥。 (图 1)
-必须在 15 摄氏度至 35 摄氏度之间的温度下使用和存放本产
品。
-如果超过一个月不使用本产品，请从产品中取出电池。
符合标准
这款飞利浦产品符合关于电磁场 (EMF) 的相关标准。据目前的科学证明，如果正确使用并按照本用户手册中的说明进行操作，本产品是安全的。
使用准备
插入电池
雪景感悟短句产品使用两节 R6 AA 1.5 伏电池。最好使用飞利浦碱性电池。
装入电池之前，双手要保持干燥。
取下电池仓盖 (图 2)
将两节电池放入电池仓。 (图 3)
注意： 确保电池的正负极指示与电池仓内的正负指示一致。
注意： 如果电池装错，则剃须刀就不会工作。
将电池仓盖装回到产品。首先插入仓盖的
顶部 (1)，然后按下底部 (2)，直到听到“
咔哒”一声。 (图 4)
如何避免因电池泄漏而引起的损坏
-切勿将产品暴露在温度高于 35°C 的环境中。
cdkey兑换码-如果一个月或一个月以上不使用本产品，则将电池取出。
-切勿将耗尽的电池留在产品中。
剃须时间
两节新电池可供 60 分钟剃须。
使用本产品
剃须
您的皮肤可能需要 2 到 3 周才能适应飞利浦
剃须系统。
在干爽的面部剃须效果最佳。
向上推动开/关滑钮以接通剃须刀电源。 (
图 5)
将剃须刀头在皮肤上移动。作直线和迂回
动作。 (图 6)
向下推动开/关滑钮以关闭剃须刀电源。
使用之后用保护盖盖好剃须刀，以防剃须
刀头受损。 (图 7)
清洁和保养
不要使用钢丝绒、研磨性清洁剂或
腐蚀性液体（例如汽油或丙酮）来
五格剖象法清洁产品。
为保证更好的剃须效果，剃须刀必须定期清
洗。
为了更方便有效地清洁剃须刀，特推出飞利浦
剃须刀头清洁喷雾剂（型号 HQ110）。有关
信息，请咨询飞利浦家庭小电器客户服务部。
注意： 飞利浦剃须刀头清洁喷雾剂并非所有
国家/地区都有销售。请向当地的客户服务中
心了解是否有售。
您也可以用下列方式清洁剃须刀：
每周：剃须刀头部件和胡茬储
藏室
关闭剃须刀。
用清洁刷清洁产品顶部。 (图 8)
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
用清洁刷清洁胡茬储藏室的内侧。 (图 10)
用清洁刷清洁剃须刀头部件的内侧。 (
藏的拼音和组词
图 11)
将剃须刀头部件重新安装到剃须刀上。
每两个月：清洁剃须刀头
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头滑离固定架。 (图 13)
不要将刀片和网罩混合在一起。
这一点很重要，因为每组刀片和网罩都已相互
磨合得很好，可获得最佳剃须效果。如果不小
心将它们弄混，剃须刀将需要数周时间才能恢
复到最佳剃须性能。
用清洁刷的短毛一侧清洁刀片。 (图 14)
按箭头方向仔细刷净。
用清洁刷清洁网罩。 (图 15)
滑动剃须刀头，将其重新安装到固定架
上，然后将固定架重新安装到剃须刀头部
件上。 (图 16)
将剃须刀头部件重新安装到剃须刀上。
极其彻底的清洁
如需彻底清洁，则应每隔六个月将剃须刀头浸
入脱脂液（如酒精）清洗。按照上述步骤 1 至
4 取下剃须刀头。清洗完成后，向网罩内的中
心点滴入一滴缝纫机油，以防剃须刀头磨损。
更换
剃须刀头应每 2 年更换一次，损坏或磨损时也
应加以更换。只能用 HQ4 Ç 飞利浦剃须刀头
进行更换。
关闭剃须刀。
按下释放钮 (1)，取下剃须刀头部件 (2)。 (
哈尔滨小吃图 9)
要取下固定架，请捏拢中央弹簧的两侧 (1)
。然后向上提起固定架，将其从剃须刀头
部件中取出 (2)。 (图 12)
将剃须刀头从固定架上滑出，用新的剃须
刀头更换。 (图 13)
将固定架重新安装到剃须刀头部件上。
将剃须刀头部件重新安装到剃须刀上。
附件
可选配以下附件：
-HQ4Ç飞利浦剃须刀头。
-
HQ110 飞利浦剃须刀头清洁喷雾剂（不在
中国出售）
环境
-电池含有可能会污染环境的物质。不要将
耗尽的电池与一般的生活垃圾一同弃置，
而应将其交给官方回收站。丢弃产品时，
一定要将电池取出，或将其送到官方指定
的回收站。
-弃置产品时，请不要将其与一般生活垃圾
堆放在一起；应将其交给官方指定的回收
中心。这样做有利于环保。 (图 17)
保修与服务
如果您需要服务或信息，或者有任何疑问，请
访问飞利浦网站：www.philips。您也可
与您所在地的飞利浦顾客服务中心联系（可从
全球保修卡中到其电话号码）。如果您的所
在地没有飞利浦顾客服务中心，则可以与当地
的飞利浦经销商联系。
保修限制
由于剃须刀头（刀片和网罩）属于易磨损物
品，因此不在国际保修条款的涵盖范围之列。
故障种类和处理方法
本章归纳了使用本产品时最可能遇到的问题。
如果您无法根据下面的信息解决问题，请与贵
国（地区）的飞利浦客户服务中心联系。
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。
发表评论